16
EN
INITIAL SETTING
Note:
• After setting “Autoprogram”, using [CH. / ] on the
remote control skips unavailable programs automatically.
• If you connect the cable system directly, contact the CATV
installer.
• If you press [POWER
y
y] or [MENU] during autoprogram,
the setting will be canceled.
• Channel settings will be saved even if the power fails.
• If you need the English menus instead of the Spanish or
French menus you are having, press [MENU]. Use
[Cursor K / L] to select “IDIOMA” or “LANGUE”, then press
[OK]. Use [Cursor K / L] to select “English”, then press
[OK]. Press [MENU] to exit the main menu.
• With regard only to the digital channel, even after the
scanning is completed if you unplug the AC power cord
before turning off the TV by pressing [POWER
y
y], the
channel setting may be lost.
Language Selection
You can choose English, Spanish, or French as your on-screen language.
1Press [MENU] to display the main menu.
2Use [Cursor K / L] to select “LANGUAGE”, then press
[OK].
PICTURE
SOUND
SETUP
FEATURES
LANGUAGE
EXIT
Select the language for setup display.
Elija el idioma de ajuste.
Sélectionner langue écran config.
English
Español
Français
3Use [Cursor K / L] to select “English”, “Español” or
“Français”, then press [OK].
PICTURE
SOUND
SETUP
FEATURES
EXIT
Select the language for setup display.
Elija el idioma de ajuste.
Sélectionner langue écran config.
Español
Français
English
LANGUAGE
4Press [MENU] to exit.
5
A8AF2UH_32MF338 B_EN_v2.indd 16A8AF2UH_32MF338 B_EN_v2.indd 16 2008/02/15 14:52:292008/02/15 14:52:29