5Supplied Accessories
user manual | registration card | remote control | batteries | ||
(1EMN22919) | (1VMN23233A) | (NF800UD) | (AAA x 2) | ||
|
|
|
|
| AAA |
|
|
|
|
| |
AAA
Phillips pan M4 x 10mm screw for mounting the stand x 3 (FPH34100)
INTRODUCTION PREPARATION
• If you need to replace these accessories, please refer to the part No. with the illustrations and call our toll free | INITIAL | |
| ||
customer support line found on the cover of this manual. | SETTING | |
• Depending on your antenna system, you may need different types of combiners (mixers) or separators (splitters). | ||
| ||
Contact your local electronics store for these items. |
| |
|
|
5Mounting the TV Stand |
|
|
| |
You must mount the stand to the TV to display upright. Be sure the front and rear of the stand match the proper direction. | WATCHING | |||
1 table. | 2 TV slowly until it clicks. | 3 threaded holes at the bottom of the | ||
Spread a thick and soft cloth over a | Insert the stand all the way to the | Drive Phillips pan screws in the 3 |
| |
Place the TV face down onto it. | Make sure not to put the AC cord | stand with a screwdriver tightly. | TV | |
| ||||
Make sure not to damage the screen. | between the stand and the TV. |
|
| |
At least two people are required at |
|
| screw holes |
|
this step. |
|
| 1 | OPTIONAL SETTING |
|
|
|
| |
| front | side |
| TROUBLESHOOTING |
|
|
| ||
|
|
| lever | |
|
|
|
| |
To Remove the Stand from this TV |
|
|
|
|
Unscrew the Phillips pan screws indicated by “ 1 ”, then lift the lever on the bottom stand |
| |||
and remove the stand from the TV slowly. Be careful not to drop the stand when you |
| |||
remove it. |
|
|
| INFORMATION |
• When mounting the stand, ensure that all screws are tightly fastened. If the stand is not properly attached, it could cause the TV to fall, | ||||
Note: |
|
|
|
|
resulting in injuries as well as damage to the TV. |
|
|
| |
• Make sure to use a table which can support the weight of this TV and is larger than this TV. |
|
| ||
• Make sure the table is in a stable location. |
|
|
| |
5Symbols Used in this Manual
The following is the description for the symbols used in this manual.
Description refers to:
DTV : Digital TV operation
TV : Analog TV operation
• If neither symbol appears under the function heading, operation is applicable to both.
Product that have earned ENERGY STAR® are designed to protect the environment through superior energy efficiency.
5
EN
A8AF2UH_32MF338 B_EN_v2.indd 5
2008/02/15 14:52:18
