7 Install channels
The first time you setup your TV, you are prompted to select a menu language and to install TV and digital radio channels (if available).This chapter provides instructions on how to reinstall and
Select your menu language
1 Press MENU on the remote control and select [Installation] > [Language].
TV menu |
|
Installation | Language |
Language | English |
Channels | Francais |
Preferences | Espanol |
Source labels |
|
Clock |
|
Current software info |
|
Reset AV settings |
|
2 Select a language and press OK to confirm your choice. 3 Press 
to return to the [Installation] menu.
4 Press MENU to exit.
Set your location to home
You can set the location of your TV to home or retail store. Choose home so that you can change the predefined settings for picture and sound.
1 Press MENU on the remote control and select [Installation] > [Preferences] > [Location].
2 Select [Home] and press OK to confirm your choice. 3 Press 
to return to the [Installation] menu.
4 Press MENU to exit.
Automatically install channels
Before you install channels, ensure that you are registered with your cable TV provider and that your equipment is correctly connected.
1 Press MENU on the remote control and select [Installation] > [Channels] > [Autoprogram] > [Start now].
TV menu Installation |
|
Channels | Autoprogram |
Autoprogram |
|
Weak channel installation | Start Now |
Installation mode |
|
Uninstall channels | li s h |
| E n g |
2 Press OK to start the installation.
•If you run [Autoprogram] on locked channels, you must to enter your PIN code.
•If you have forgotten your PIN, reset it (see ‘Set or change your PIN’ on page 16).
3 Select [Cable] or [Antenna] and press OK.
TV installation
System searching. Please wait...
Analog channels found: 0
Digital channels found: 0
•When [Antenna] is selected, the TV detects antenna signals. It searches for NTSC and ATSC channels available in your area.
•When [Cable] is selected, the TV detects signals supplied by cable. It searches for NTSC, ATSC, and QAM modulated channels available in your area.
•When complete, this message appears [Channel search completed.].
4 Follow the
Optimize the signal quality from your antenna
You can optimize your signal quality by tuning in ATSC channels with weak signals, and adjusting the antenna.
1 Press MENU on the remote control and select [Installation] > [Channels] > [Installation mode] mode.
2 Select [Antenna] and press 
to confirm your choice.
3 Press 
and 
to enter [Weak channel installation].
4 Highlight a channel from the list of TV channels and press the green color button on the remote control.
»The signal strength for the channel is displayed.
EN 21
