Magnavox 47MF439B Manage cables, Connect the power cord, Disconnect the TV from the power

Contact your local DBS provider for more information about the connections and the TV channels.

Connect to a set-top box

A cable box or satellite set-top box can be connected to the TV through the following connections:

•ANT

•A/V (Composite Video and Audio)

•S-Video

•YPbPr (Component Video Input)

•HDMI

For information about how to connect a set-top box, see the Quick Start provided.

Connect a set-top box through RF IN/OUT

If the TV is connected to a cable box or satellite set-top box via a coaxial connection, set the TV to channel 3 or 4, or to the channel specified by the service provider.

Connect a set-top box through component video input or HDMI

3 Connect the power cord plug to the power outlet. Ensure that the cord is tightly secured at both ends.

E n g l i s h

Disconnect the TV from the power

Caution

•Pull the power cord by the plug; do not pull on the power cord.

1 Unplug the power cord from the power outlet.

2 Unplug the power cord from the power connector at the back of the TV.

Manage cables

Route your power cord, antenna cable and all other cables through the cable holder at the back of the TV.The holder helps keep your cables tidy and easily manageable.

R	R	R	SERV. U
L	L	L

SPDIF

OUT

Pr Pr

	Pb	Pb	VIDEO	L
			S-VIDEO
	Y	Y		R
	AV 1	AV 2	AV 3	DVI AUDIO
				IN
HDMI 1	HDMI 2			HDMI 3

Connect the power cord

Warning

•Verify that your power voltage corresponds with the voltage printed at the back of the TV. Do not insert the power cord if the voltage is different.

1Locate the power connector at the back of the TV.

The location of the power connector varies according to TV model.

2Insert the power cord fully into the power connector.

EN 9