TD007.QX33 03.3.14 1:50 PM Page 17
Rear Panel 17
Antenna Hole
Connect the stem or base of the supplied rod antenna here. Details are on page nine.
DC 13.2V
ANT.
L
AUDIO OUT
R
COAXIAL
Power Cord
Connect to a standard AC outlet (120V/60Hz).
AUDIO OUT L/R jacks
(Audio Out, left and right, white and red)
Connect these jacks to an analog Stereo. The Stereo will have right and left Audio In jacks. This means it receives and sends sound through two channels, the right and the left. These jacks are usually red and white on the Stereo.
Details are on page 11.
COAXIAL Jack
(Digital Audio Out) (orange)
Connect this jack to a Digital Stereo using a digital audio coaxial cable (not supplied). Use this connection if the Stereo has Dolby Digital compatibility and has a Digital Coaxial Audio In jack. You may also use this connection when connecting the TV/DVD to a
ANT. Jack
(Antenna In)
Connect an antenna or Cable TV signal here. This brings TV channels to the TV/DVD. If you do not connect an antenna or Cable TV signal to the TV/DVD (or connect to a Cable Box/Satellite Receiver through this jack), you will not receive any TV channels. Details are on pages eight to nine.
DC 13.2V Jack
Connect the car battery cord here. Details are on page 10.
