Magnavox 9MDPF20 owner manual First-Time Setup,Watching TV, Press VOL. or to adjust the volume

TD007.QX33 03.3.14 1:50 PM Page 12

12 First-Time Setup,Watching TV

The TV/DVD can memorize available TV channels. If you are	1
using a Cable Box or Satellite Receiver, you do not need to
set channels at the TV/DVD. Set the TV/DVD to the output		4
channel of the Cable Box or Satellite Receiver (channel 03 or
04) or AUX. Then select channels at the Cable Box or
Satellite Receiver. Details are on page eight.
These SETUP screens will appear the first time you turn on		5
the TV/DVD.
1 Press STANDBY-ONto turn on the TV/DVD.	2-3
Press ENTER repeatedly to select ENGLISH,
ESPAÑOL, or FRANÇAIS. The selected language
2 will appear inside the [ ].

This will be the language of the TV/DVD setup menus.

– SET UP –

B LANGUAGE [ENGLISH] ESP FRA

AUTO PRESET

3 Press ▲ or ▼ to select AUTO PRESET. Then press ENTER. The TV/DVD scans and memorizes active channels.

When scanning is complete, the TV/DVD will go to the lowest available channel automatically.

– SET UP –

LANGUAGE

[ENGLISH] ESP FRA

BAUTO PRESET

4 To watch TV, press the CH. ▲ or ▼ buttons to select memorized channels. Memorized channels are those that appear automatically when you flip through channels. If a channel is skipped, you still can use the Number buttons to select it. This is a non-memo- rized channel; it may have weak reception in your area.

Remember, if you are using a Cable Box/Satellite Receiver, set the TV/DVD to channel 3 or 4 or AUX. Change channels at the Cable Box/Satellite Receiver.

5 Press VOL. ▲ or ▼ to adjust the volume.

VOLUME 20

Helpful Hints

•If the power fails, you may need to repeat this first-time setup.

•You may not see these menus when you turn on the TV/DVD. Set channels and the menu lan- guage later. Details are on pages 18-19.

•To select Cable TV channels high- er than 99, press the +100/+10 button, then press the Number buttons for the last two digits. For example, to select channel 125, press +100/+10, 2, 5. Precede single-digit channel num- bers with a zero (for example, 01 ... 09).

•Pressing CH. ▲ or ▼ in DVD mode will return the unit to TV mode.

•If you turn off the unit in DVD mode, when you turn it on again, it will be in TV mode.

•To remove the SET UP menu, press SETUP on the remote.