TD007.QX33 03.3.14 1:50 PM Page 9
Hooking Up the TV/DVD (cont’d) 9
CHooking Up Your TV/DVD with the supplied Rod Antenna
To install the supplied rod antenna, push the stem of the antenna into the antenna hole at the top on the rear of the TV/DVD. Connect the antenna wire to the ANT(enna) Jack on the rear of the TV/DVD as shown. Extend the antenna and adjust its length, direction, and angle for the clearest picture.
Rod Antenna
(supplied)
DC 13.2V
ANT.
L
AUDIO OUT
R
COAXIAL | ANT. |
DHooking Up Your TV/DVD to Another Video Source
(VCR, DVD Player, Camcorder, etc.)
You may need this connection if you want to play Discs or tapes on other equipment but watch them on the TV/DVD. Press the SELECT button on the remote to choose AUX at the TV/DVD when viewing materials playing on other equipment.
Audio and video cables are not supplied.
AUDIO/VIDEO OUT
Jacks on VCR (example only)
3CH 
IN 4CH
AUDIO VIDEO
OUT ANT.
L R
INOUT 
Connect audio cables to the AUDIO OUT Jacks on the VCR and to the red and white AUDIO In Jacks on the front of the TV/DVD.
3CH
4CH
AUDIO VIDEO
OUT
L R
IN
IN
ANT.
OUT
AUDIO/VIDEO In
Jacks on front of
TV/DVD
Connect a Video cable to the VIDEO OUT Jack on the VCR and to the yellow VIDEO In Jack on the front of the TV/DVD.
2 When all other connections are complete, plug in the TV/DVD’s power cord.
3 Before you turn on the TV/DVD, go to page 12.
