AUDIO OUT
COAXIAL
ANT.
AUDIO OUT
COAXIAL

10 Optional Connections

• You cannot use a Mini-Disc or
Digital Audio Tape deck to copy
Dolby Digital 5.1channel sur-
round sound Discs.
•Discs recorded in Dolby Digital
should show this on the Disc or
case.If the Disc is not recorded
in Dolby Digital 5.1channel sur-
round sound,you will not hear
multi-channel sound even if you
use the Digital Stereo hookup.
Helpful Hints

Digital Stereo Hookups

You can connect the TV/VCR/DVD to a Stereo
that has a Digital Coaxial In jack.Use this
hookup if you want to hear the TV/VCR/DVD
sound through the Stereo instead.Use these
connections for a Dolby Digital-compatible
Stereo or for a Receiver that has a Mini-Disc or
Digital Audio Tape deck.
1Connect the antenna/Cable TV
signal.Details are on pages eight-nine.
2Connect a digital audio coaxial
cable (not supplied) to the AUDIO
OUT COAXIAL jack on the
TV/VCR/DVD.
Also connect the cable to the
Stereo’s COAXIAL DIGITAL
AUDIO IN jack.
3If the Stereo is Dolby Digital-com-
patible,set DOLBY DIGITAL to
ON. If the Stereo is not Dolby Digital-
compatible or if you connected to a
Mini-Disc or Digital Audio Tape Deck,
set DOLBY DIGITAL to OFF.Details are
on page 72.
An incorrect setting causes noise distor-
tion and damages speakers.
To see if your Stereo has Dolby Digital,
look for a Dolby Digital logo on your
Stereo.Or, refer to the Stereo owner’s
manual.
To A UDIO OUT
COAXIAL jack
on TV/VCR/DVD
To Stereo’s COAXIAL
DIGITAL AUDIO IN jack
T0006UG_6006UG_EN_1.qx3 04.5.12 10:09 AM Page 10