Rerecording (Tape Duplication) 33

• Unauthorized recording of copy-
righted television programs,
videotapes,or other mater ials
may infringe on the rights of
copyright owners and violate
copyright laws.
• Different brands of equipment
may operate differently.
• Make sure all connections are
secure.Otherwise ,you may not
record both picture and sound.
•Programs that are copyright
protected may not record clearly.
•You cannot record a DVD onto a
videotape using this
TV/VCR/DVD.
•You can use this connection to
simply view tapes playing on a
camcorder or VCR at the
TV/VCR/DVD.Follow steps 1,2,
and 4 for connections and AUX
setup.Then play the tape on the
camcorder,etc., as usual.
1Make the connections shown above.Use audio
and video cables (not supplied).Connect the
source unit (VCR or Camcorder) to a power
source after connections are made.
2The VCR or Camcorder will play your tape.Insert a
prerecorded tape in the source unit.If play
begins,press STOP on the VCR or Camcorder.
3The TV/VCR/DVD will record your tape.Insert a
blank videotape in the cassette compartment
of the TV/VCR/DVD. Make sure the tape’s record
tab is intact and the TV/VCR/DVD power is on.
4Point the TV/VCR/DVD remote control at the
TV/VCR/DVD.Press SELECT or CH.o/puntil
AUX appears on the screen.The TV/VCR/DVD is
now in Line Input or Auxiliary mode.
5Press SPEED until the desired tape speed (SP
or SLP) appears in the lower left corner of the
screen.
6Press PLAYon the VCR or Camcorder and
REC/OTR on your TV/VCR/DVD at the same
time.Videotape copying will begin.
7To stop copying, press STOP/EJECT C A on the
TV/VCR/DVD,then stop the tape on the VCR
or Camcorder.
RL
AUDIOVIDEOHEADPHONE
OP/EJECT
VIDEO
OUT
L
AUDIO
OUT
R
AUDIO and VIDEO OUT Jacks on source unit
(VCR or Camcorder)
AUDIO and VIDEO In Jacks
on front of TV/VCR/DVD
Audio Cables from
AUDIO OUT to AUDIO In
Video Cable from
VIDEO OUT to VIDEO In
Helpful Hints
T0006UG_6006UG_EN_1.qx3 04.5.12 10:09 AM Page 33