Before Using the TV/VCR/DVD 7

12
12
3

Remote Control Battery Installation

1Remove the battery compartment lid on the
bottom of the remote control.Slide the lid down and
off.Follow the direction of the arrow on the lid.
2Place two AAbatteries inside the battery com-
partment.Align the +and ends as indicated.
3Replace the battery compartment lid.

Battery Safety

Battery Usage CAUTION - To prevent battery leakage that
may result in bodily injury,property damage, or damage to
the unit:
Install ALL batteries correctly,with the + and - markings on
the battery aligned as indicated on the unit;
Do not mix batteries,for example, old with new or carbon
with alkaline;and
Remove batteries when the unit will not be used for a long
time.

Recording Prevention

Videotapes have record tabs to ensure you do not erase
recordings accidentally.
1To prevent accidental recording, break off the
tab with a screwdriver.
2To r ecord again,cover the hole with cellophane
tape.

Using the Remote Control

Point the remote control at the remote sensor on the
front of the TV/VCR/DVD. Details are on page 16.
Do not put objects between the remote control and the
TV/VCR/DVD.

TV/VCR/DVD Maintenance

Remove any light adhesive stick-on notes from the video
cassette before putting the cassette in the TV/VCR/DVD.
Removable labels can jam the TV/VCR/DVD.
The TV/VCR/DVD requires periodic maintenance to main-
tain its excellent performance.This TV/VCR/DVD has an
internal head cleaning system.However,the video heads
will eventually require cleaning or replacement.Only an
authorized service center should perform this service.
• Your new product,its packaging,
and this manual contain materials
that can be recycled and reused.
Specialized companies can recycle
your product to increase the
amount of reusable materials and
to minimize the amount that
needs to be properly disposed.
Your product uses batteries that
should not be thrown away when
depleted but should be disposed
of as small chemical waste.
Please find out about the local
regulations on disposal of your old
product,batteries, manual, and
packaging when you replace exist-
ing equipment.
Helpful Hint
T0006UG_6006UG_EN_1.qx3 04.5.12 10:09 AM Page 7