Magnavox CCZ130AT owner manual Timer Recording, Daily

CCZ130comb 4/5/99 7:32 PM Page 32

32 Timer Recording

Follow the steps below to program the TV/VCR to record TV programs while you’re away from home. The TV/VCR will turn itself on, record, and turn itself off automatically. Before you begin, make sure:

●The clock is set. If not, CLOCK MUST BE SET appears.

●Channels are set up.

●There is a tape in the TV/VCR. (Make sure the tape’s record tab is intact and the tape is long enough to record the pro- gram.)

Complete each step within 60 seconds of completing the previous step. If you don’t, you may start again at step 1.

1

Press the MENU button.

>	PRIM. SETUP	PRESS B
	VCR PROGRAM
	VCR SETUP
	CAPTION
	REMINDER
	BRIGHTNESS

2

Press the PLAY/▲ button or the STOP/▼ button to select VCR PROGRAM, then press the FF/SEARCH B button.

VCR PROGRAM

>ONCE DAILY(MON-FRI)

WEEKLY PROGRAM REVIEW

SELECT KL CHOOSE B

TO END PRESS EXIT

3

Press the PLAY/▲ button or the STOP/▼ button to select a ONCE, DAILY, OR WEEKLY recording. Then, press the FF/SEARCH B button.

●ONCE: The TV/VCR will record a TV program on any day you choose, up to 12 months away.

●DAILY: The TV/VCR will record every day from Monday to Friday – starting at the same time and recording the same channel for the same length of time.

●WEEKLY: The TV/VCR will record the same channel on the same day, at the same time, and for the same length of time every week.

Daily	DAILY PROGRAM (MON-FRI)
	PROGRAM -1 2 3 4 5 6 7 8-

Recording (example)

SELECT PROGRAM NUMBER

TO END PRESS EXIT

1	POWER	MENU	STATUS/EXIT	CLEAR
	1	2	3	MEMORY
	4	5	6
	7	8	9	CHANNEL
		0	+100	ALT.CH
				SLEEP
	VOLUME	MUTE		SPEED
	REW/SEARCH		PLAY/	FF/SEARCH
	REC/OTR		STOP/	PAUSE/STILL

2-3

Helpful Hints

•If the power fails, programmed timer recordings will be restored when the clock is reset. (The clock will reset itself automatically if you are using the AUTO CLOCK feature. Details are on pages 14 - 17. If you are not using the AUTO CLOCK feature, reset the clock manually. Details are on pages 12 - 13.) The timer recording will not occur only if the timer recording was scheduled to take place during the power fail- ure.

•You cannot set a timer recording if RECORD DEFEAT is set to ON. Details are on page 36.