6 Hooking Up the TV/VCR

1 Hook up your TV/VCR using one of the connections shown.

AHooking Up Your TV/VCR With a Cable TV Signal or Outdoor Antenna

Connect a Cable TV signal or an antenna to the ANT(enna) Jack.

ANT.

ANT.

B Hooking Up Your TV/VCR With a Cable

Connect the Cable TV/Satellite signal to the IN Jack on the Cable Box/Satellite Receiver.

Box/Satellite Receiver

To view any channel, set the TV/VCR to the Cable Box/Satellite Receiver output channel (channel 03 or 04). Then, select channels at the Cable Box/Satellite Receiver.

Connect an RF coaxial cable

(75-ohm, not supplied) to the OUT Jack on the Cable Box/Satellite Receiver and to the ANT(enna) Jack on the TV/VCR.

ANT.

OUTIN

RF coaxial cable

(not supplied)

ANT.

Hooking Up Your

 

TV/VCR With an

Rod Antenna

CIndoor Antenna

(not supplied)

To install a rod antenna (not

 

supplied), push the stem of

 

the antenna into the antenna

 

hole at the top on the rear of

 

the TV/VCR. Connect the

 

antenna wire to the

 

ANT(enna) Jack on the rear

 

of the TV/VCR as shown.

 

Extend the antenna and adjust

 

its length, direction, and angle

ANT.

for the clearest picture.

ANT.

Instructions continue on

 

the next page.

 

Page 6
Image 6
Magnavox MC194EMG owner manual Hooking Up the TV/VCR, Hook up your TV/VCR using one of the connections shown, Rod Antenna