Setting TV Channels for the First Time | Magnavox MC194EMG specs

8 Setting TV Channels for the First Time

The TV/VCR can memorize the channels you receive in your area. If you are using a Cable Box or Satellite Receiver, you do not need to set channels at the TV/VCR. Set the TV/VCR to the output channel of the Cable Box or Satellite Receiver (channel 03 or 04). Then select the channel to be viewed on the Cable Box or Satellite Receiver.

If you do not see these menus when you turn on the TV/VCR for the very first time, set TV channels as instruct- ed on page 14 instead.

1

2-3

POWER

SLEEP/WAKE UP

PLAY

REWF.FWD

STOP

MENU		ALT.C
	DISPLAY	H

1 Press POWER to turn on the TV/VCR.

1 2 3

4 5 6

7 8 9

CH.

2 Press F.FWD/B or REW/s to select ENG- LISH or ESPAÑOL (Spanish). The selected lan- guage will appear inside the [ ].

– SET UP –

BLANGUAGE [ENGLISH] ESPAÑOL

0 +100 VOL.

SPEED RESET PAUSE/STILL

RECORD

SLOW TIME SEARCH MUTE

AUTO PRESET

3 Press PLAY/▲ or STOP/▼ to select AUTO PRESET. Then press F.FWD/B. The TV/VCR scans and memorizes all active channels in your area. (To stop the scanning, press POWER to turn the TV/VCR off, then on again.)

When scanning is complete, the TV/VCR will go to the lowest available channel automatically.

Use the CH(annel) o/p button to select memorized channels. Use the Number buttons to select non- memorized channels.

– SET UP –

LANGUAGE [ENGLISH] ESPAÑOL

BAUTO PRESET

Helpful Hints

•The TV/VCR distinguishes between standard TV channels and Cable TV channels.

•To play or record a videotape before setting TV channels, press the MENU button to remove the SETUP menu. To set up chan- nels later, see Resetting TV Channels on page 14.

•To select Cable TV channels higher than 99, press the +100 button, then press the Number buttons for the last two digits. For example, to select channel 125, press +100, 2, 5. Precede single-digit channel numbers with a zero (for example, 01 ... 09).

•You will need to set up the lan- guage and channels again after a power failure.

Image 8

Magnavox MC194EMG owner manual Setting TV Channels for the First Time, Press Power to turn on the TV/VCR

Contents

MC194EMG Model No Serial No Dear Magnavox product ownerFor Customer Use Declaration of Conformity FeaturesIntroduction Table of Contents Before Using the TV/VCR Hook up your TV/VCR using one of the connections shown Hooking Up the TV/VCRRod Antenna Instructions continue on Next Hooking Up the TV/VCR cont’d Jack white on the front of the TV/VCRBent pin Crooked Pin Straight Pin Setting TV Channels for the First Time Press Power to turn on the TV/VCR Playing a Videotape Follow the steps below to play a tapeInsert a tape in the TV/VCR’s cassette com 5Press STOP/EJECT on the TV/VCR to remove the tape Recording Recording options are on pages Remote Control Front Panel AC Power Cord Connect to a standard AC outlet To supply power to the TV/VCRRear Panel Antenna Hole Menu Language, Resetting TV Channels Resetting TV ChannelsMenu Language Press MENU. Press PLAY/ or STOP/ to select Language Adding/Deleting Channels Setting the Clock Auto Clock SettingBefore you begin, make sure Channels are set. Details are on pages eight Setting the Clock cont’d Use the channel number you found at step Manual Clock Setting Manual Clock SET Month DAY Daylight-Savings Time To adjust the item Status Displays, Picture ControlStatus Displays Picture Control Tion. Then, press F.FWD/B Timer RecordingDo not operate the unit during a timer recording Timer Recording cont’d Press PLAY/ or STOP/ until the end hourAppears. Press F.FWD/B Speed SP or SLP Extending a Timer Recording Correcting Timer Recording DetailsCancelling Timer Recordings To cancel a timer recording that is in progress Timer Recording Auto Return TV/VCR is now in Line Input or Auxiliary mode Rerecording Tape Duplication One-Touch Recording 3Press REC/OTR on the front of the TV/VCR Playback Options Forward and Reverse Searching SP/LP/SLPHigh Speed Searching LP/SLP Viewing a Still Picture Press PLAY/ or STOP/ to select Repeat Repeat PlayRepeat Play allows you to play a tape repeatedly Zero Return Rental Playback, Zero ReturnRental Playback Time Search To cancel the Time Search at this point, press MenuTime Search, Index Search Setting V-Chip TV Rating SettingsTV Rating Explanations Violence Sexual situations Language Inappropriate dialog Setting V-Chip cont’d When you select TV-Y7When you select TV-PG, TV-14, or TV-MA Press F.FWD/B to select Block or View Mpaa Rating Settings Mpaa Rating ExplanationsPress PLAY/ or STOP/ to select Mpaa RATING. Then, press F.FWD/B Closed Caption Press MENU. Press PLAY/ or STOP/ to select Caption Wake Up Timer Press SLEEP/WAKE UP until Wake UP Timer appearsBefore you begin Each button press changes the time by 10 minutes Sleep Timer Press Menu to remove the Sleep Timer displayYou may choose 30 minutes, one hour, an hour and a Half, or two hours Automatic Operation Features Glossary Helpful Hints Helpful Hints cont’d Specifications Magnavox, P.O. Box 520890, Miami, FL 33152 402 Limited WarrantyModel # Serial # Index