REAR PANEL
AANALOG OUT jacks
These are the output jacks for the analog audio signals. Connect them to the CD or AUX jacks, etc. on the amplifier using the supplied analog connecting cord. Remember that the white jack is for the LEFT channel and the red jack is for the RIGHT channel, and connect the jacks correctly.
* Never connect these jacks to the PHONO jacks of the amplifier.
BREMOTE CONTROL IN/OUT jacks
The remote control operations of a system can be performed by connecting the unit to a Marantz
FRONT PANEL
z Standby button
Press to switch the power ON, and press again to switch it OFF.
*If the SR110 is connected to the REMOTE CONTROL jacks on the rear panel and its power is ON, the unit will not be set to the standby mode even when this button is pressed.
x7 (Stop) button
Press to stop play.
cDisc tray
Place a disc on the tray with its label surface facing up.
ENGLISH
CREMOTE CONTROL SELECTOR
EXT./INT. switch
When the unit is to be used on its own, set this selector to "INT", and when connecting the unit to Marantz audio components equipped with a
*Remote control operations cannot be performed if the REMOTE CONTROL SELECTOR is set to "EXT" when the unit is to be used on its own.
v6 (Play/Pause) button
Press to start play or temporarily stop play.
bOPEN button
Press to open the front panel.
n0 (Open/Close) button
When this button is pressed, the disc tray opens so place the disc on the tray with its label surface facing up. When it is pressed again the disc tray closes.
DDIGITAL OUT COAX. jacks
The CD signals during playback are output digitally to these jacks. Connect these jacks to a recorder component, amplifier, D/A converter or other unit equipped with coaxial digital input jacks using a coaxial cable obtainable from your audio dealer.
EDIGITAL OUT OPT. jacks
The CD signals during playback are output digitally to these jacks. Connect these jacks to a recorder component, amplifier, D/A converter or other unit equipped with optical digital input jacks using a square optical cable obtainable from your audio dealer.
FPower cord jack
Connect this to a household AC 120 V outlet.
mInfrared sensor
This sensor is for receiving signals transmitted from the remote control unit.
,Á/ ¢, 4/ 1
(Track search/Skip) buttons
Á/ ¢ : When pressed once, play starts from the next track. When held down for more than one second, the track being played is searched in the forward direction.
4/ 1 : When pressed once, play resumes from the start of the track now playing. When it is pressed again within 1 second after it was pressed the first time, play starts from the track before.
When held down for more than one second, the track being played is searched in the reverse direction.
.Display panel
This panel displays the operating modes and statuses.
Ú0REPEAT button
Press for repeat play. Each time the button is pressed, the mode changes in sequence from
fi"clear."
Ú1DISPLAY button
Press to select the time display. Each time the button is pressed during play, the display changes in sequence from "elapsed track time" fi "remaining track time" fi "total remaining time" fi "clock display" (when the unit is used on its own) fi "elapsed track time." If this button is pressed in the standby mode when the unit is being used on its own, the
5