6.Select a function (Play mode)
ENGLISH | TIMER | TIMER |
1Turn the JOG control m to select the source (TUNER or CD) to be played.
2Press the TIMER button ⁄0.
3When you select “TUNER”, turn the JOG control m to select a preset number to be received.
When you select “CD”, turn the JOG control m to select a track number to be played.
4Press the TIMER button ⁄0.
Note:
If you select a track number which is not on the CD, the play mode will start track number 1 when the timer activates.
7.Adjust the volume level
TIMER
1Turn the JOG control m to adjust the volume level.
2Press the TIMER button ⁄0.
8.Set Once or Daily
TIMER
1Turn the JOG control m to select the “Once”, when you use this programmed event only once.
Turn the JOG control m to select the “EveryDay”, when you use this programmed event everyday.
2Press the TIMER button ⁄0.
Note:
If you select the “TimerOff”, this setting is cancelled.
In recording mode, the power is turned on before 1 minute at timer setting time.
9.Press the TIMER button ⁄0to decide the setting.
“TIMER” lights up in red. The setting contents are scrolled.
10.Press the power switch z to set the timer standby mode. This system (SR110 and the connected components) is set standby mode and the displays are turned off. The power switch of SR110 lights up in amber.
Note:
Timer will not be activate when the power is turned on. Set the standby mode to activate the timer.
You can set the timer standby mode by pressing the power switch z while scrolling the setting contents.
PROGRAMME TIMER SETTING WITH REMOTE CONTROL
You can set the timer setting with the power, 4, ¢ and TIMER buttons on the remote control.
Press the 4 or ¢ button o !0instead of turning the JOG control m.
Other procedures are same as “Programme Timer Setting” with SR110.
Important
-Timer play mode cannot activate when no disc is inserted in the selected source.
NOTE OF THE TIMER FUNCTIONS
•If the displayed time blinks, the time is incorrect. You need to set the correct time.
•SR110 can save the present time for 5 minutes if the AC plug is pulled out the AC outlet. If the AC plug is plugged into the AC outlet within this period (5 minutes), the present time data is hold. You do not need to set the present time again.
CONFIRM AND CHANGE TIMER SETTING
1.Press the power switch q/z to turn the power of the unit ON.
2.Display the contents of timer setting by pressing the TIMER button !8/⁄0.
The following programmed contents are displayed by pressing the TIMER button !8/⁄0.
3.You can change the displayed content with the JOG control m if necessary.
4.Press the power switch q/z again.
Important
-Timer mode is cancelled if you quit confirming halfway through a procedure.
-Never confirm the setting after play mode starts, this will lead to the off timer setting is cancelled and the power is not turned off.
12
