Marantz CD110 manual Remote Control Unit

REMOTE CONTROL UNIT

q (Standby) button

Press to turn the unit's power on or set it to the standby mode. (Operation is not possible if the unit is connected to the SR110, the SR110's rear switch is set to SYSTEM and the CD110's REMOTE CONTROL SELECTOR EXT/INT switch is at EXT.)

wDISPLAY button

Press to change what is shown on the display from the disc information to the clock display, etc. (The clock display appears only when the unit is used on its own.)

eSCROLL button

Press to scroll the text display of discs that support text.

rAMS button

Press to play the first 10 seconds of all the tracks on the disc in sequence starting with the first track.

tNumeric buttons

Press to specify track numbers directly. These buttons cannot be used with MP3 discs.

yREPEAT button

Press for repeat play. Each time the button is pressed, the mode changes in the following sequence:

All track repeat fi 1-track repeat fi clear.

uRANDOM button

Press for random play to play the tracks in a random sequence.

iTIMER button

Press to set the timer and clock. (These settings can be performed only when the unit is used on its own.)

oCD TEXT button

Press to switch what is shown on the display from disc information to text when a CD-TEXT compatible disc is used.

!03 (Play) button

Press to start play.

!14, ¢ buttons

4: Press to play from the start of the track now playing. When they are pressed again within 1 second after it was pressed the first time, play starts from the track before.

¢: When pressed once, play starts from the next track.

!27 (Stop) button

Press to stop disc play.

!31, Á buttons

1: Press to forward-search through the track now playing.

Á: Press to reverse-search through the track now playing.

These buttons cannot be used during MP3 disc play.

!48 (Pause) button

Press to stop disc play temporarily.

!5PROG. button

Press for program play.

This button cannot be used with MP3 discs.

!6CANCEL button

Press to cancel a programmed track.

ENGLISH

3