TUNER OPERATION
TO LISTEN TO THE TUNER
1 | 5 | 2, 4 | 3 | 6 |
STANDBY | DISPLAY |
|
| MUTEOPEN |
|
|
|
| VOLUME |
|
| AMP | BAND | + |
|
|
|
| |
|
| TUNER | MEMO |
|
|
| TIMER | WOW |
|
| PHONES |
|
|
|
1.Press the power switch q/z to turn the power ON.
2.Press the TUNER button . or FM/AM button w. “TUNER” is displayed.
TUNER | TUNER |
PRESET MEMORY OPERATION
The SR110 receiver can store up to 30 stations selected in the FM and AM bands.
The preset memory function allows frequency, receiving mode (STEREO or MONO) and also station name to be stored in the memory. The preset memory can be stored in two ways:
Manual preset memory |
|
3, 4 | 2 |
STANDBYDISPLAY | MUTEOPEN |
| VOLUME |
AMP | BAND |
| + |
TUNER | MEMO |
TIMER | WOW |
PHONES |
|
ENGLISH
BAND
3.To select the band of reception, press the BAND button ⁄1 or the FM/AM w button on the remote control.
4.Press the TUNER button . to set the frequency. “FREQ” is displayed.
5.Turn the JOG control m clockwise to increase or counter- clockwise to decrease the frequency, or press ¡ button !2to increase or 1 button !3to decrease.
1.Select the desired station, referring to “TUNER OPERATION”.
2.Press the MEMO button ⁄2.
The “M” indicator will blink for approx. 5 seconds. During this period.
3.Select the preset number by turning the JOG control m right for up or left for down
4.Press the JOG control m to decide.
The preset number can be selected by directly entering it with the numeric buttons on the remote control.
Auto preset memory
This allows a band to be scanned automatically, a station with good reception to be found and to be stored in the preset memory.
4 | 1 | 2 |
Auto scan tuning
To start the auto scan tuning, turn the JOG control m or press and hold 1/¡ button !2/ !3for a while continuously. Auto scan tuning stops automatically when a broadcasting station is tuned in, and the “TUNED” display lights up. When SR110 receives stereo broadcasting, “STEREO” display also lights up.
6.Adjust the volume with the VOLUME control ⁄4or VOLUME buttons yu.
To receive sound in monaural, press the TUNER button . until “TUNERMOD” is displayed. Turn the JOG control m to display “MONO”.
TUNER
Note:
-“AUTO” is set at initial. In this case, the noise is muted when SR110 tunes a frequency of FM band which has no broadcasting.
-Muting of the FM band is not activated when the tuner mode is set to MONO. Please take care with the volume.
STANDBYDISPLAYMUTEOPEN
VOLUME
AMP | BAND |
| + |
TUNER | MEMO |
TIMER | WOW |
PHONES |
|
1.Press the TUNER button . or FM/AM button w. “TUNER” is displayed.
TUNER | MEMO |
2.Press and hold down the MEMO button ⁄2for 3 seconds or more.
The auto preset memory operation starts. “AutoMemo” is blinking.
3.When a station is received, scanning pauses for 5 seconds.
4.Press the JOG control m to store the received station within 5 seconds. The scanning restarts after pressing the JOG control m.
If the JOG control m is turned within 5 seconds, scanning restarts and the frequency being received is not stored in the memory.
9