TIMER PLAYBACK
A CD can be played at a specific time by setting the playback time. The ON time and OFF time are set for timer playback.
1.Press the TIMER button i on the remote control unit once. On the display, "On Time" appears first followed by the time, and the hour flashes. (Playback ON hour setting)
This flashes.
2.Set the playback ON hour using the 4 and ¢ buttons
!1on the remote control unit or the 4/1 and Á/¢ buttons , on the main unit.
3.Press the 7 button !2/x to enter the selection. The hour input appears on the display, and the minute flashes. (Playback ON minute setting)
This flashes.
4.Set the playback ON minute using the 4and ¢buttons
!1on the remote control unit or the 4/1 and Á/¢ buttons , on the main unit.
5.Press the 7 button !2/x to enter the selection.
On the display, "Off Time" appears first followed by the time, and the hour flashes. (Playback OFF hour setting)
6. Next, the playback OFF time is set. Repeat steps 2 |
| |
through 5 to set the hour and minute. | ENGLISH | |
Upon completion of the settings, the timer setting mode is | ||
|
cleared automatically.
TIMER
This lights.
7.Press the 0 button n on the main unit to extend the disc tray, place the disc on the tray, and close the tray.
8. Set the 
button q/z on the unit to off. The button now lights up orange.
SETTING AND CLEARING TIMER PLAYBACK
1. Press the TIMER button i on the remote control unit twice. "Timer Off" or "Timer On" appears on the display.
2. Switch from "Timer On" and "Timer Off" or vice versa using the 4 and ¢ buttons !1on the remote control unit or the 4/1 and Á/¢ buttons , on the main unit.
Select "Timer On" to set timer playback.
TIMER
Select "Timer Off" to clear timer playback.
3.Press the 7 button !2x/ to enter the selection.
Important
Timer playback cannot be set if "No Disc", "Error Disc" or "Blank Disc
13
