Marantz CD110 manual Program Play, Listening To Favorite Tracks In A Favorite Order, Track number

PROGRAM PLAY

LISTENING TO FAVORITE TRACKS IN A FAVORITE ORDER

This function cannot be used with MP3 discs.

–Random play cannot be used with program play.

–AMS cannot be used with program play.

1.When the PROG. button !5is pressed in the stop mode, the "PROG" indicator flashes, and the program mode is established.

TRACKTOTALTIME

CD PROG

flashes

2.Select the tracks to be programmed using the numeric buttons or 4 and ¢ buttons !1on the remote control unit. (They can also be selected using the 4/1 and Á/¢ buttons , on the main unit.)

When the tracks are to be selected using the 4 and ¢ buttons !1on the remote control unit (or 4/1 and Á/ ¢buttons , on the main unit), first select the tracks, and then press the PROG. button !5.

*To input a 2-digit track number to select a track using the numeric buttons, first input the 10's digit and, within 2 seconds, input the 1's digit.

(Example: When selecting track number 5 as the first track and its play time is 3 min. 39 sec.)

Track number		Program number
TRACK	TOTAL		TIME
CD			PROG

TRACKTOTALTIME

CD PROG

TO CHECK THE PROGRAM CONTENTS

Press the PROG. button !5during programming.	ENGLISH
Each time this button is pressed, the tracks will be displayed
one after the other in the sequence in which they were
programmed.
TO CLEAR A PROGRAMMED TRACK
Press the CANCEL button !6during programming.
Each time this button is pressed, the tracks will be deleted one
at a time in sequence starting with the one programmed last.
TO CLEAR THE ENTIRE PROGRAM
To clear the entire program, either press the 0 button n on the
main unit, or else press the CANCEL button !6on the remote
control unit three times.
TO ADD TO THE PROGRAM
Select the track or tracks to be added using the numeric buttons
or the 4 and ¢ buttons !1on the remote control unit (or
4/1 and Á/¢ buttons , on the main unit) while the unit
is in the stop mode (while "PROG" is lighted) when there is
room for more tracks in the program.
To select a track using the 4 and ¢ buttons !1on the
remote control unit (or 4/1 and Á/¢ buttons , on the
main unit), first select the track, and then press the PROG.
button !5.
The newly added track is added to the end of the program.
If, when using the numeric buttons to select tracks 1
through 9 on a disc with 10 or more tracks in total, track
number 3 is to be selected after track number 1, for
example, first press the numeric button "1" and then wait at
least 2 seconds before pressing "3."
When selecting track number 10 or higher such as track
number 13, first press the numeric button "1" and then
press "3" before allowing 2 seconds to elapse.
When using the 4 and ¢ buttons !1on the remote
control unit (or 4/1 and Á/¢ buttons , on the
main unit) for programming, first select the number of the
desired track, and then press the PROG. button !5to enter
it.
REPEAT DURING PROGRAM PLAY
If all track repeat is selected, all of the tracks in the program are
repeated, not all of the tracks on the disc.

3.Then, repeat step 2 for the next track and so on to program up to 30 tracks.

4.Upon completion of all the programming, press the 3 button !0.

The selected tracks are now played in the programmed order.

Note:

If track 31 or higher is included in a program, the time display will read "--:--" from that point on.

If the program total time exceeds 99 minutes, the time display will read "--:--".

11