![](/images/new-backgrounds/1301814/30181453x1.webp)
nnRange Spec (Playback range selection)
You can set whether to play all of the files on the USB memory device, or just the files within a folder during playback.
1
2
3 Select the range you want to playback using [8] and [9], and press [ENTER].
GSelectable itemsH
1 | All | Plays back all of the files | on the USB memory device. |
|
| Plays back the files in the | selected folder. |
2 | Folder |
4 Press [MENU].
The settings are saved, and the display returns to normal.
Performing menu settings
nnResume (Resume playback settings)
You can set whether to record the place where playback is stopped. When resume playback is set to on, this unit starts USB memory device playback from the start of the file that was previously being played.
1 Select “USB Setup=>” using [8] and [9], and press [ENTER].
2 Select “Resume=>” using [8] and [9], and press [ENTER].
3 Select “1 Off” or “2 On” for the resume playback settings using [8] and [9], and press [ENTER].
GSelectable itemsH
1 Off Resume playback is not set.
2 On Resume playback is set.
4 Press [MENU].
The settings are saved, and the display returns to normal.
NOTE
•Resume playback cannot be used if 2 is pressed to stop the USB memory device.
Press 3 to pause the track. Even if the input source is changed or the unit power is switched off, when the USB memory device is played again, playback starts from the start of the track that was previously being played back.
•Resume playback only works when an identical USB memory device is inserted. If another USB memory device is inserted, the unit will start playing from the first file.
•The unit may not play your desired file if files have been added to or deleted from the identical USB memory device.
•Playback will be resumed from the beginning of the current file.
ENGLISH
Getting started Basic connections Basic operation Advanced connections Advanced operations Explanation of terms Troubleshooting Specifications Index
24