ENGLISH
Basic connections
This chapter explains how to connect the analog device (amp) | Analog connection |
and power cord. | |
For other connections, see the sections below. |
|
nn USB memory device/iPod connection (vpage 14) nn Remote control connection (vpage 14)
NOTE
•Do not plug in the power cord until all connections have been
completed.
• When making connections, also refer to the owner’s manual of the other components.
•Insert the plugs securely. Loose connections will result in the
generation of noise.
• Be sure to connect the left and right channels properly (left with left, right with right).
•Be sure to connect the input and output properly.
•Do not bundle power cords together with connection cables. Doing so can result in humming or noise.
•Do not connect the unit to the PHONO input connectors on the amplifier.
Amplifier
AUDIO
AUDIO
IN
LR
L R
Signal flow
L
R
Connecting the power cord
Do not plug in the power cord until all connections have been completed.
To household power outlet
(AC 120 V, 60 Hz)
Power cord
(supplied)
NOTE
•Insert the plugs securely. Loose connections will result in the generation of noise.
•Do not unplug the power cord while the unit is operating.
•Do not use a power cord other than the cord supplied with this unit.
Preparations
Connecting cables
Select the cables according to the equipment being connected.
| Audio cables |
|
Analog connections (stereo) |
| |
(White) | L | L |
(Red) | R | R |
Audio cable (supplied)
7