Marantz DV9500 manual Select TV Aspect, Setup Examples, Select Audio, Box Pan Scan Wide Squeeze

Models: DV9500

1 62
Download 62 pages 14.26 Kb
Page 53
Image 53

DVD Setup Menu

3Select TV Aspect

4:3 L - Box

4:3 Pan Scan

16:9 Wide

16:9 Squeeze

Select one of the above with the cursor buttons (5/) and then press the ENTER button.

Note

The TV aspect ratios available for HDMI outputs depend on the connected TV or projector. For details, see the user’s manual of your TV or projector.

Only 16:9 Wide and 16:9 Squeeze can be selected when the HDMI/DVI resolution is set to 720p or 1080i.

When this TV Aspect is in effect, it also determines the aspect output of Composite Video, S-Video, and Component Video.

6

English

Setup Examples

Resolution

 

Playback Disc

 

 

 

 

 

(HDMI Setting)

Disc Recorded in Squeeze Ratio

Disc Recorded in 4:3 Ratio

 

 

 

 

 

 

Aspect (HDMI Setting)

Monitor Settings

Aspect (HDMI Setting)

Monitor Settings

 

 

 

 

 

480p/576p

 

Full/Squeeze

4:3

Standard

(525p/625p)

16:9 Wide

16:9 Wide

 

Normal

 

 

 

 

720p/1080i

16:9 Squeeze

Normal/Through

16:9 Squeeze

4:3

 

(750p/1125i)

 

Through

 

 

 

 

 

 

 

 

 

 

 

 

Some monitors may use setting names that are different than those shown here.

4 Select Audio

Auto: Audio is output as a bit stream when the connected device is set to Dolby Digital, DTS, or MPEG. Audio is output as linear PCM when the connected device is set to Linear PCM. If the connected device cannot accept bit streams, audio will be output as linear PCM.

PCM: Audio is converted to linear PCM.

Select one of the above with the cursor buttons (2/3).

Note

Audio is not output from Super Audio CDs or DVD-Audio discs with CPPM protection.

Audio is not output when the player is con- nected to a device with an HDCP-compatible DVI jack.

All of PCM signal from digital out is converted to 44.1kHz/48kHz.

If DTS is played when connected equipment is set to PCM or Audio is set to PCM, the output of analog output from the unit is impossible.

Turn the power on the front panel OFF during play or pause. Noise from a television etc. may come out.

When the video output has been turned off using the VIDEO ON/OFF button on the remote control, audio cannot be output (see page 15).

When the video output has been set to Off in Pure Mode and CD or Super Audio CD have been played, audio cannot be output.

53

Page 53
Image 53
Marantz DV9500 manual Select TV Aspect, Setup Examples, Select Audio, Box Pan Scan Wide Squeeze