DVD Setup Menu
HDMI Audio Output
|
|
| HDMI Setting (Audio) | ||
|
| Audio Formats |
|
| |
|
|
| Auto | PCM | |
|
|
|
|
| |
| Dolby Digital | Dolby Digital*1 | 2 Channel DOWNMIX | ||
|
|
|
| ||
| Dolby Digital Karaoke | Dolby Digital*1 | Left/Right | ||
DVD |
|
|
|
| |
Linear PCM | Left/Right | Left/Right | |||
| |||||
|
|
|
| ||
| DTS | DTS*1 | 2 Channel DOWNMIX | ||
|
|
|
| ||
| MPEG | MPEG*1 | Left/Right | ||
|
|
|
|
| |
|
| With CPPM protection | |||
|
|
| |||
Without CPPM protection | 2 Channel DOWNMIX*3 | 2 Channel DOWNMIX*3 | |||
|
| ||||
|
|
|
| ||
CD/MP3/Super Audio CD*4 | Left/Right | ||||
|
| ||||
DTS CD | DTS | ||||
|
| ||||
Video CD | Left/Right | ||||
|
|
|
|
| |
*1: The player automatically switches to PCM output when the connected device does not support Dolby Digital, DTS, or MPEG bit streams.
*2: Audio is not output from
• Audio is not output for sections marked with 
in the table.
*3: Audio is not output from discs that prohibit 5.1 channel mode or downmixing.
*4: Audio is not output from Super Audio CDs. This applies to only play the CD Audio part.
Resetting the Player
Resetting the player returns all menu, picture and password settings to their factory defaults.
To reset the player, press and hold
7(STOP) on the front panel when press- ing Power switch to turn the power on.
POWER ON/OFF | 7 (STOP) | |
| PLAY | STOPPAUSE |
| OPEN/CLOSE |
|
STANDBY | HDMI/DVI |
|
POWER ON/OFF | PHONES | LEVEL |
FL OFF | ||
- +
Note
•Static electricity or other external influences may cause malfunctioning of this unit. In this case, unplug the power cord and then plug back in. This will usually reset the unit for proper operation. If this does not correct the problem, please consult your nearest MARANTZ service center.
•If this operation is performed, all memories in which the Program Memory (page 25), Condition Memory (page 21), Bookmark (page 24), Capture (page 29) and Video Adjust’s Memory (page 30) have been entered are simultaneously erased. Be extremely careful before doing this operation.
54
