Connecting other equipment
| FLASHER IN | ||
|
|
|
Connect an external control device or other | This unit can be controlled by connecting a | |
device for servicing. (Use a straight cable for | control box or other control device to this unit. | |
the connection.)
Control box or control device
External control device
GND
Signal
Monaural
To use the FLASHER IN jack, set the remote control switch to “INT.”.
Remote control jacks connection
If this unit is connected to a Marantz amp, the amp can be controlled via this unit using the Marantz Remote App or web control function (vpage 39). Also, remote control signals received by the amp can be used to control this unit.
nnConnectionUse the supplied remote connection cable to connect the REMOTE CONTROL IN terminal of this unit to REMOTE CONTROL OUT terminal of the amplifier.
| nn Setting |
|
|
Set the remote control switch on the rear |
|
|
panel of this unit to “EXT.” to use this | Set to “EXT.” | The unit |
feature. |
•This setting will disable remote sensor reception of this unit.
• To operate the unit, point the remote control at the remote sensor of the amplifier.
To use this unit without connecting it to the | Amplifier |
amplifier, set the remote control switch to |
|
“INT.”. |
|
Preparation
Operation
Information
9