nnUpdate on web screen

Firmware can be updated using the “Web control function” (vpage 39).

“Web control function” (vpage 39) settings must be completed in advance on a PC belonging to the same network.

For information on obtaining update files, please contact our customer service center.

1 Click r from step 5 for the “Web control function” (vpage 39).

The PC will display the following screen. Wait for approximately 1 minute.

You can also gain access by entering the IP address shown by the unit into a web browser.

GThe web displayH

FIRMWARE

Please wait for a minute...

GThe unit’s screen displayH

3 When the following screen is displayed, click the

“OK” (e) button. Updating will begin.

Firmware

Warning:

Once started,the upload process cannot be interrupted or adorted, in order to ensure the integrity of the Digital Media Player.

Are you sure you want to proceed? OK e

NOTE

Do not operate the unit while updating is in progress.

4 When the following screen is displayed, updating is complete.

Firmware

New Firmware: xxx.fw

Firmware upload status: 100% completed.

The upload process finished successfully.

Please close this.

General Settings [General]

nnNotificationUpdate

Displays a notification message on this unit’s menu screen when the latest firmware is released with “Update”. Connect to broadband Internet (vpage 8) when using this function.

1 Press MENU.

Turns on the Menu settings mode and the Menu appears on the display (vpage 11 “Menu map”).

2 Use ui and ENTER to select “General” – “Firmware” –

“Notification” – “Update”, then press ENTER or p.

“Update Notification” menu appears.

3 Use ui to select “On”, then press ENTER or p.

On Display update message.

Off Do not display update message.

Preparation

Operation

Information

2 When the following screen is displayed by the PC, click the “Choose File” (q) button, select the update file, and click the “Upload” (w) button.

Firmware

Choose File

Upload new firmware

Upload

q

w

Button names may vary depending on the OS language used on your computer.

•When you press ENTER during display of the notification message, the “Check For Update” is displayed. (Refer to page 12 for more information on “Update”.)

•Press o to erase the notification message.

13