Setting the first setup [Quick Setup]
•For details on “Quick Setup” operations, see the separate “Getting Started”.
•If you cancelled “Quick Setup” menu or changed the network environment, perform “Menu” – “Quick Setup”.
General Settings [General]
LanguageSets the language for display the menu.
•The default setting is “English”.
1 Press MENU.
Turns on the Menu settings mode and the Menu appears on the display (vpage 11 “Menu map”).
2 Use ui and ENTER to select
“General” – “Language”, then press ENTER or p.
English / Français / Español
When this unit is in the stop state and there is no input signal and operation for 30 minutes, it automatically enters the standby mode.
• The default setting is “On”.
1 Press MENU.
Turns on the Menu settings mode and the Menu appears on the display (vpage 11 “Menu map”).
2 Use ui and ENTER to select
“General” –
“Select
3 Use ui to select “On” or “Off”, then press ENTER or p.
The setting is entered.
NOTE
In the following situations, the
•When the source is “iPod” (Direct mode) or “AirPlay”.
General Settings [General]
FirmwarennUpdate•In order to update the firmware, the environment and settings required for connecting to broadband internet are needed (vpage 8).
•Perform the firmware update operation after at least 2 minutes has elapsed since turning this unit’s power ON.
1 Press MENU.
Turns on the Menu settings mode and the Menu appears on the display (vpage 11 “Menu map”).
2 Use ui and ENTER to select “General” – “Firmware” –
“Update”, then press ENTER or p.
Check For Update Check for firmware updates. You can also check approximately how long it will take
to complete an update.
Update Start Execute the update process.
•If updating fails, the set automatically retries, but if updating is still not possible, one of the messages shown below is displayed. If the display reads as shown below, check the settings and network environment, then update again.
| Display | Description |
|
| Updating fail | Updating failed. |
|
| Login failed | Failure to login to server. |
|
| Server is busy | Server is busy. Wait a while then try |
|
|
| again. |
|
| Connection fail | Failure in connecting to server. |
|
| Download fail | Downloading of the firmware has failed. |
|
|
|
|
|
Preparation
Operation
Information
12