Display a notification message on this unit’s menu screen when downloadable firmware is released with “Add New Feature”.
Connect to broadband Internet (vpage 8) when using this function.
1 Press MENU.
Turns on the Menu settings mode and the Menu appears on the display (vpage 11 “Menu map”).
2 Use ui and ENTER to select “General” – “Firmware” –
“Notification” – “Upgrade”, then press ENTER or p.
“Upgrade Notification” menu appears.
3 Use ui to select “On”, then press ENTER or p.
On Display upgrade message.
Off Do not display upgrade message.
•When you press ENTER during display of the notification message, the “Add New Feature” is displayed. (Refer to page 14 for more information on “Add New Feature”.)
•Press o to erase the notification message.
•In order to add new functions, the environment and settings required for connecting to broadband internet are needed (vpage 8).
•Perform the add new feature operation after at least 2 minutes has elapsed since turning this unit’s power on.
1 Press MENU.
Turns on the Menu settings mode and the Menu appears on the display (vpage 11 “Menu map”).
2 Use ui to select “General”
– “Firmware” – “Add New
Feature”, then press ENTER or p.
Upgrade Status Display a list of the additional functions provided by the upgrade.
Upgrade Start Execute the upgrade process.
•If the upgrade is not successful, an error message identical to those in “Update”(vpage 12) will appear on the display. Check the settings and network environment, then update again.
| Upgrade ID | The ID number shown on this screen is |
|
| needed when carrying out the procedure. |
|
| |
|
|
|
See the Marantz website for details about updates.
When the procedure is complete, “Registered” is displayed and updates can be carried out. If the procedure has not been carried out, “Not Registered” is displayed.
General Settings [General]
[Notes concerning use of “Update” and “Add New Feature”]
•Do not turn off the power until updating or upgrading is completed.
•Even with a broadband connection to the Internet, approximately 20 minutes is required for the updating/ upgrading procedure to be completed.
•Once updating/upgrade starts, normal operations on this unit cannot be performed until updating/upgrading is completed.
•Furthermore, updating/upgrading the firmware may reset the backup data for the parameters, etc. set for this unit.
•If the update or upgrade fails, remove and
•Information regarding the “Update” function and “Add New Feature” will be announced on the Marantz web site each time related plans are defined.
•When usable new firmware is released with “Update” or “Add New Feature”, a notification message is displayed on the menu screen. When you do not want to be notified, set “Update” (vpage 13) and “Upgrade” (vpage 14) to “Off”.
Preparation
Operation
Information
14