Setting the audio [Audio]
This unit is equipped with a sound quality adjusting function which allows users to enjoy the desired playback sound quality.
•This setting remains effective even if the power is turned off.
Noise Shaper
Digital feedback is used to improve the
Although no difference is observed in the measured values, the sound quality is changed, allowing users to specify a favorite sound quality.
1 Press MENU.
Turns on the Menu settings mode and the Menu appears on the display (vpage 11 “Menu map”).
2 Use ui to select “Audio” – “Noise Shaper”, then press
ENTER or p.
“Noise Shaper” menu appears.
3 Use ui to select “On” or “Off”, then press ENTER or p.
The setting is entered.
NOTE
The Noise Shaper function is disabled during playback of a 32 kHz sampling frequency source and DSD.
DC Filter
This filter is effective in preventing excessive speaker vibration when playing music source where audio with extremely low noise characteristics has been recorded. (The cut frequency is set at 1.7 Hz.)
1 Press MENU.
Turns on the Menu settings mode and the Menu appears on the display (vpage 11 “Menu map”).
2 Use uito select “Audio” – “DC Filter”, then press ENTER or p.
“DC Filter” menu appears.
3 Use ui to select “On” or “Off”, then press ENTER or p.
The setting is entered.
NOTE
•The DC Filter function is disabled during playback of a 32 kHz sampling frequency source and DSD.
•The “Noise Shaper”, “DC Filter” and filter characteristics have a last memory function. These settings remain in memory even if the power is turned off.
18
Digital Out (Setting for the digital output)
1 Press MENU.
Turns on the Menu settings mode and the Menu appears on the display (vpage 11 “Menu map”).
2 Use ui to select “Audio” – “Digital Out”, then press ENTER or p.
“Digital Out” menu appears.
3 Use ui to select “On” or “Off”, then press ENTER or p.
•When “Digital Out” is set to “Off”, the digital out off indicator lights on the display.
Preparation
Operation
Information