Resetting the microprocessor
Perform this procedure if the display is abnormal or if operations cannot be performed. When the microprocessor is reset, all the settings are reset to their default values and all previously stored custom settings will be have to be manually restored.
ENTER
INPUT
1 Pull the power cord out of the power outlet.
2 Plug the power cord into a power outlet while pressing ENTER and INPUT on the main unit.
3
If “Initialized” does not display in step 3, start over from step 1.
Specifications
nn Audio performance
• Analog output | 2 channels |
Channels: | |
Playable frequency range: | 2 Hz – 96 kHz |
Playable frequency response: | 2 Hz – 50 kHz |
| PCM sampling frequency: 192 kHz) |
| 2 Hz – 20 kHz |
| (PCM sampling frequency: 44.1 kHz) |
S/N: | 110 dB (Audible Range) |
Dynamic Range: | 110 dB (Audible Range) |
Harmonic Distortion: | 0.001 % (1 kHz, Audible Range) |
• Output Level | 2.3 V RMS Stereo |
Unbalanced: | |
Balanced: | 4.6 V RMS Stereo |
Headphone output: | 30 mW/32 Ω/ohms (variable maximum) |
• Digital output | 0.5 |
Coaxial: | |
Optical: | |
• Digital input | 0.5 |
Coaxial: | |
Optical: | |
USB (Front) | USB Type A (USB 2.0 High speed) |
USB (Rear) | USB Type B (USB 2.0 High speed) |
nn Power supply
Power supply voltage/frequency: | AC 120 V, 60 Hz |
Power consumption: | 50 W |
Power consumption in standby mode: | 0.4 W |
Power consumption in |
|
“Network Control” – “On” mode: | 3 W |
•For purposes of improvement, specifications and design are subject to change without notice.
Preparation
Operation
Information
56