External Speaker Connections
|
|
| VIDEO 1 | |
|
|
| VIDEO 2 | |
|
|
| VIDEO 3 | |
|
| 1 | L ( MONO ) | |
|
| AUDIO | ||
|
| R | ||
|
| DVD1/HD1 | Y | |
|
| CR / PR | ||
|
|
| CB / PB | |
RIGHT | LEFT | 2 | L ( MONO ) | |
AUDIO | ||||
R | ||||
|
|
| RGB 1 | |
|
| RGB2/DVD2/HD2 | R / CR / PR | |
|
| HD | ||
|
|
| G / Y | |
|
|
| B / CB / PB |
| VD | |
3 | L ( MONO ) | |
AUDIO | ||
R |
RGB 3
( Digital RGB )
|
| CONTROL |
|
| LOCK |
|
| ON / OFF |
SPEAKERS MUST |
|
|
HAVE MORE THAN |
| REMOTE |
7WATT RATING |
| |
IMPEDANCE 6 OHM |
| CONTROL |
RIGHT LEFT |
| EXTERNAL |
|
| CONTROL |
|
|
|
AC-IN
External speakers may be connected to the plasma monitor to reproduce sound from VIDEO, DVD or RGB signal sources.
External speakers may be connected directly to the SPEAKERS terminals or indirectly by connecting a stereo system amplifier to the audio outputs.
CAUTION: Unplug the plasma monitor and all connected components before connecting external speakers. Use only speakers with
To connect external speakers directly to the plasma monitor:
1.Strip the ends of the speaker wires.
2.Press down the tabs below the SPEAKERS terminals, insert the speaker wire and release the tab to secure the speaker wire connection:
[a]Connect the right speaker (located at right side of the monitor when viewed from the front) positive (+) wire to RIGHT +.
[b]Connect the right speaker negative
[c]Connect the left speaker negative
[d]Connect the left speaker positive (+) wire to LEFT+.
10
