Track Handling
Track Erase
To erase a track you want to erase;
•From stop status, select the track you want to erase and press ERASE key.
•The track number selected is shown, and erase message blinks for confirmation.
•Pressing ERASE key again, the track selected is erased, and completion message is displayed for 3 seconds. Then resumes stop status.
•Instead, pressing STOP key cancels to erase the track and resumes stop status.
REPEAT | RENUMBER | ERASE | SILENT SKIP AUTO MARK |
FORMATPRESET
Display at Track Erase Operation EMBED
TRACK | 5 | 5 | 5 | 5 |
5 |
|
|
| |
5 |
|
|
| 5 |
5 |
|
|
| |
5 | 5 | 5 | 5 | 5 |
| ||||
|
| |||
|
|
|
|
Blinking for confrimation
TRACK
Executing
TRACK
Completion message (for 3 seconds)
Note
After a track is erased, the number of the following tracks after the erased track are not automatically renumbered. The number of erased track becomes absent. The track number of the newly recording is always next to the last track number (the largest track number +1). The absent track number is not
PLAYBACK and EDITING
Renumbering Track Number
To renumber the track numbers of tracks after the absent number caused by track erase;
From stop status, press RENUMBER key.Renumber message blinks for confirmationPressing RENUMBER key again, renumbering is executed. Completion message is displayed for 3 seconds, and units resumes stop status.
Instead, pressing STOP key, renumbering is cancelled, and units resumes stop status.
REPEAT | RENUMBER | ERASE | SILENT SKIP AUTO MARK |
FORMATPRESET
Display at renumbering operation
5 | 5 | 5 | 5 | 5 |
|
|
| ||
5 |
|
|
| 5 |
5 | 5 | 5 | 5 | 5 |
| ||||
|
| |||
|
|
|
|
Blinking for confrimation
Executing renumber
Complete message (for 3 seconds)
23
