Marantz PMD680 manual Charging Battery, Data Display, Low Battery Warning and Auto Power Off

GENERAL FUNCTION

Charging Battery

Charging Battery is done while,

•power is supplied from AC adaptor.

•Ni-Cad battery is loaded.

•presetting of battery is Ni-Cad battery (refer to page xxx,

PRESETTING).

•CHARGE slide switch setting is ON

While charging, charge LED blinks. After charge is completed, charge LED becomes stably on.

Note

Data Display

Changing Display Information

Pressing DISPLAY (TIME/DATE) key changes the display information as follows.

During stop mode

q Total Track No Total Track Time

•Charge does not happen and charge LED turns off while power is on. Charge occurs only in standby (power off) status.

TRACK

SP

TOTALTIME

-dB ∞�50 40 24 6 2 0

Low Battery Warning and Auto Power Off

When the remaining battery energy is anticipated to last in about xxx minutes, battery warning indicator turns on in the display (1st warning).

TRACK

TIME

-dB ∞�50 40 24 6 2 0

After that, when the remaining battery energy is anticipated to last soon, battery warning indicator in the display and REC LED start to blink, and beep sound turns on and off in 1 second interval (2nd warning).

TRACK TIME

5	5	5
5		5	6 2 0
		-dB ∞�50 40 24
5	5	5

After 2nd warning, when the battery voltage goes down lower than operating voltage, the unit enters auto power off process. If the unit is working (playback, recording, editing), necessary shut down process (file update and closing) takes place. Then the power is turned off and the unit enters standby status.

w Total Track No	Remain Time
	(time available for recording
	at the selected bit rate)
	TRACK		REMAIN TIME
SP
-dB ∞�50	40 24	6	2 0

e Current Time

TIME

SP

-dB ∞�50 40 24 6 2 0

r Current Date

TIME

SP

-dB ∞�50 40 24 6 2 0

8