SETTING UP
Connecting Microphones
Connect the microphones as shown below.
With the PMD680, you can connect a microphone (for mono recording) to either the MIC 1 (XLR) jack or the MIC 2 (1/4" phone) jack.
MIC (1/4")
or
MIC (XLR)
Notes
•Take care to not connect or disconnect microphones while recording. This may result in unwanted sounds in the recording.
To output analog audio signals to another audio component
Connect the source component’s analog line input jacks to this unit’s LINE OUT (RCA) jack.
TAPE DECK, etc.
LINE IN
Notes
•To connect the mono PMD680 LINE OUT to a stereo input, a
To record from or output through a telephone wire
Connect the phone line to the TELEPHONE IN/OUT jack.
Connecting Analog
Components
The following illustrations show you how to connect analog audio components for recording or playback.
To record from analog audio components
Connect the source component’s analog line output jacks to this unit’s LINE IN (RCA) jack.
TAPE DECK, etc.
LINE OUT
Notes
•To connect a stereo source to the mono PMD680 LINE IN, a
RJ-11 splitter
Wall jack
Phone
Notes
•Do not start recording until the telephone connects with the dialed telephone number.
•Please be advised that connecting the PMD680 to a telephone line is illegal in some countries.
6
