Contents | Connections | Playback | Settings | Tips | Appendix |
wClick the “Advanced” tab.
e Select the sampling rate and bit rate to be applied to the D/A converter.
•It is recommended that “24 bit, 192000 Hz (Studio Quality)” is selected.
rClick “Apply”. t Click “Test”.
•Check that audio from this unit is output from the computer.
NOTE
•The dedicated driver must be installed in the computer before this unit is connected to a computer. Operation will not occur correctly if connected to the computer before the dedicated driver has been installed. Moreover, if the computer is running Windows XP as its OS, the computer’s speed will decrease significantly, and a computer restart may be required.
•Operation may fail in some computer hardware and software configurations.
Digital Audio Interface Properties
General | Supported Formats | Levels | Advanced | w |
|
|
|
|
t
Select the sample rate and bit depth to be used when running in shared mode.
2 channel, 24 bit, 192000 Hｚ(Studio Quality) | Test |
|
2 channel, 24 bit, 44100 Hｚ(Studio Quality) |
|
|
2 channel, 24 bit, 48000 Hｚ(Studio Quality) |
|
|
2 channel, 24 bit, 96000 Hｚ(Studio Quality) |
| e |
2 channel, 24 bit, 192000 Hｚ(Studio Quality) |
| |
Allow applications to take exclusive control of this device | ||
Give exclusive mode applications priority
Restore Defaults
r
OK Cancel 
Apply
|
|
|
|
|
|
|
| 49 |
|
|
|
|
|
Front panel |
|
| Display |
|
| Rear panel |
| Remote |
|
| Index |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
