Contents

Connections

Playback

Settings

Tips

Appendix

USB Resume

This unit stores the point at which playback of a file was stopped previously, and starts playback from the same point the next time playback is started.

On (Default) : Resume playback is set.

Remote : Resume playback is not set.

NOTE

Resume playback works even if the USB memory device is disconnected and

then reconnected. However, if a different USB memory device is connected, the resume information for the previous USB memory device is deleted.

The resume information may be deleted when the USB memory device is removed and files are added or deleted.

Digital Out

Switches the digital audio output on/off.

On (Default) : Use the digital audio output connector.

Off : Do not use the digital audio output connector.

%

• When digital output is turned off, the “DOFF” indicator lights up on the display.

The “Digital Out” has a memory retention function where the settings remain stored and unchanged even when the disc is changed or the power is turned off.

Audio Out

You can set whether to fix (Fixed) or vary (Variable) the analog audio output level.

Fixed (Default) : Fixes the analog audio output level (0 dB).

Variable : You can adjust the analog audio output level using the VOLUME df buttons on the remote control.

%

When you enter “Fixed” or “Variable”, “Are You Sure?” is displayed for approximately 3 seconds on the display. Select “OK” to set or “Cancel” to cancel the selection.

The remote control needs to be set in order to adjust the analog audio output level (vpage 57).

When the analog output level is adjusted, the headphone volume also changes. When using the headphones, adjust the volume to a suitable level by also using the headphone volume control knob.

When “Variable” is selected, the analog audio output level can be adjusted to --- dB (minimum) and between the range from –99 dB – 0 dB (Default–40 dB).

NOTE

Note that the analog audio output level changes to the maximum (0 dB) when the analog audio output setting is changed from (Variable) to (Fixed).

Before changing the settings, turn the volume of the amp connected to the analog audio output terminals (AUDIO OUT) and headphones connected to the unit to the minimum volume.

 

 

 

 

 

 

 

 

55

 

 

 

 

 

Front panel

 

 

Display

 

 

Rear panel

 

Remote

 

 

Index

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 55
Image 55
Marantz SA8005 appendix USB Resume, Digital Out, Audio Out