Marantz SR9300 English, AMP PAGE 5/8, AMP PAGE 6/8, AMP PAGE 7/8, AMP PAGE 8/8, TUNER PAGE 1/3

ENGLISH

SURROUND MODE 1

AMP PAGE 5/8

AUTO, S-DIRECT, Mono, Stereo, M-Stereo(Multi channel stereo), Virtual, hall, matrix, Movie.

These buttons are used to select surround mode.(see page 39, 40)

SURROUND MODE 2

AMP PAGE 6/8

THX

CINEMA, Surr.EX(THX Surround EX), Ultra2 and THX5.1 Music These buttons are used to select THX mode. (see page 39)

DTS

dts, dts-ES, Neo6-cinema and Neo6-music

These buttons are used to select DTS mode. (see page 39)

SURROUND MODE 3

AMP PAGE 7/8

DOLBY SURROUND

2and PL(Pro Logic), PL2-movie, PL2-music

These buttons are used to select Dolby Surround mode. (see page 40)

Circle Surround

CSII-cinema and CSII-music

These buttons are used to select SRS Circle Surround mode. (see page 40)

Note:

• Use MODE button (AMP page 5/8) to select CSII-Mono.

MULTI ROOM

AMP PAGE 8/8

On/Off

These buttons are used to switch the unit to multi room mode.

Volume + and –

These buttons are used to adjust the sound level to multiroom system.

Mute

This button is used to mute the sound to multi room system temporarily.

Sleep

This button is used to set the sleep timer to multi room system.

Tuner

This button is to jump to TUNER's screen in this remote control unit.

OSD button

This button is used to turn on the On Screen Display for general information.

Multi room speaker On and Off

These buttons are used to switch the unit to multi room speaker mode.

Note:

• See page 49 to detail of Multi Room system.

TUNER

TUNER PAGE 1/3

Power On and Off buttons

These buttons are used to turn on or off SR9300

AM, (LW), FM buttons

These buttons are used to switch between FM and AM mode of the tuner.

Tuning (^ :up / v : down ) buttons

These buttons are used to change the frequency.

Preset (^ :up / v : down ) buttons

These buttons are used to change the preset station.

Preset Scan button

This button is used to start a scan automatically through the stations preset into the receiver's memory.

CLR (Clear) button

This button is used to cancel certain memory or programming of tuner operations.

14