Marantz SR9300 manual Plii PRO Logic II Music Parameter, CS II Circle Surround II Parameter

PLII (PRO LOGIC II) MUSIC PARAMETER

Pro Logic II-Music mode creates a rich and enveloping surround ambience from stereo sources such as CDs.

In this mode, SR9300 includes three controls to fine-tune the soundfield as follow.

5 P L II - MU S I C	P ARAME T E R
P ARAME T E R	: D E F AU L T
P ANOR AMA	:	O F F
D I MEN S I ON	:	4
C E N T E R W I D T H :		0
MA I N		E X I T

Select “PRO LOGIC II” in MAIN SETUP MENU with Up or Down cursor button, and press the OK button.

PARAMETER: Select “DEFAULT” or “CUSTOM” with Left or Right cursor button

If you select “CUSTOM”, you can adjust three parameters as follow

PANORAMA: Select the Panorama mode On or Off with Left or Right cursor button.

Panorama wraps the sound of the front left and right speakers around you for an exciting perspective.

DIMENSION: Set the Dimension level between 0 and 6 level in 1 level interval with Left or Right cursor button. Adjust the soundfield either towards the front or towards the rear.

This can be useful to help achieve a more suitable balance from all the speakers with certain recordings.

CENTER WIDTH: Set the Center width level between 0 and 7 level in 1 level interval with Left or Right cursor button. Center Width allows you to gradually spread the center channel sound into the front left and right speakers. At its widest setting, all the sound from the center is mixed into the left and right.

This control may help achieve a more spacious sound or a better blend of the front image.

If “None” was selected for the Center speaker setting in the Speaker size, then this setting will not appear.

If you finish the setup in this menu, move cursor to “MAIN” with Up or Down cursor buttons and press OK button.

CS II (CIRCLE SURROUND II) PARAMETER

6 C S	II P ARAME T E R
T RUBA S S		:	0
S R S	D I A L OG	:	0
MA I N			E X I T

1. Select “CS II” in MAIN SETUP MENU with Up or Down cursor button, and press the OK button.

2. To Select desired contents as below, press Up or Down cursor button

TRUBASS: Set the TRUBASS level between 0 and 6 level in 1 level interval with Left or Right cursor button. TRUBASS produced by the speakers to be an octave below the actual physical capabilities of the speakers adding exciting, deeper bass effects.

SRS DIALOG: Set the SRS DIALOG level between 0 and 6 level in 1 level interval with Left or Right cursor button.

This can be popped out of the surround audio effects allowing the listener to easily discern what the actors say.

If “NONE” was selected for the Center speaker setting in the Speaker size, then this setting will not appear.

If you finish the setup in this menu, move cursor to “MAIN” with Up or Down cursor buttons and press OK button.

MULTI ROOM

SR9300 has some feature to MULTI ROOM SYSTEM as source selector, OSD information, sleep timer, Multi Room Speaker output and remote control.

You can set such feature by this sub-menu.

7	MU L T I ROOM
MU L T I	ROOM	:	O F F
MU L T I S P KR		: O F F
V I D EO		:	D V D
A UD I O		:	D V D
V O L UME S E T U P		:	V AR I AB L E
V O L UME L E V E L		:	- 9 0 d B
S L E E P T I ME R		: O F F
- - - - MA I N - ROOM			S T A T U S - - - -
V I D EO : D V D		AUD I O : D V D
MA I N			E X I T

1. Select “MULTI ROOM” in MAIN SETUP MENU with Up or Down cursor button, and press the OK button.

2. To Select desired contents as bellow , press Up or Down cursor button

MULTI ROOM: To switch on the Multi-room output, press Left or Right cursor button.

MULTI SPKR: To switch on the Multi-room speaker output, press Left or Right cursor button.

VIDEO: Select the video source of the Multi-room output with Left or Right cursor button.

AUDIO: Select the audio source of the Multi-room output with Left or Right cursor button.

VOLUME SETUP: Select whether the Multi-room output level is variable or fixed with a Left or Right cursor button.

VOLUME LEVEL: Adjust the Multi-room output level with Left or Right cursor button.

SLEEP TIMER: SLEEP timer function is available during the multiroom is active, set the time with Left or Right cursor button.

MAIN ROOM STATUS: Selected input source in the main room will be displayed.

Notes:

•If “VOLUME” is set to “FIXED”, the multi-room output level cannot be adjusted from the second zone.

If you finish the setup in this menu, move cursor to “MAIN” with Up or Down cursor buttons and

press OK button.

ENGLISH

35