IMPORTANT SAFETY

INSTRUCTIONS

READ BEFORE OPERATING EQUIPMENT

This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of.

1.Read Instructions – All the safety and operating instructions should be read before the product is operated.

2.Retain Instructions – The safety and operating instructions should be retained for future reference.

3.Heed Warnings – All warnings on the product and in the operating instructions should be adhered to.

4.Follow Instructions – All operating and use instructions should be followed.

5.Cleaning – Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

6.Attachments – Do not use attachments not recommended by the product manufacturer as they may cause hazards.

7.Water and Moisture – Do not use this product near water-for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

8.Accessories – Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.

9.A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.

10.Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

11.Power Sources – This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.

12.Grounding or Polarization – This product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

AC POLARIZED PLUG

13.Power-Cord Protection – Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

14.Protective Attachment Plug – The product is equipped with an attachment plug having overload protection. This is a safety feature. See Instruction Manual for replacement or resetting of protective device. If replacement of the plug is required, be sure the service technician has used a replacement plug specified by the manufacturer that has the same overload protection as the original plug.

15.Outdoor Antenna Grounding – If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See Figure 1.

16.Lightning – For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.

17.Power Lines – An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

18.Overloading – Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

19.Object and Liquid Entry – Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

i

Page 3
Image 3
Marantz SR9300 manual Important Safety Instructions, Read Before Operating Equipment

SR9300 specifications

The Marantz SR9300 is a high-performance audio/video receiver that has garnered a reputation for delivering exceptional sound quality and enhanced functionality. This receiver is part of the esteemed Marantz lineup, a brand that has been synonymous with premium audio equipment for decades. The SR9300 integrates advanced technologies and robust features that make it a favorite among audiophiles and home theater enthusiasts alike.

One of the standout features of the SR9300 is its multi-channel amplification capability. With a power output of 110 watts per channel across seven channels, it ensures that every sound detail is reproduced with clarity and precision, filling even the largest rooms with rich, immersive audio. This model supports a wide range of surround sound formats, including Dolby Digital EX and DTS ES, providing an enveloping sound experience that brings movies and music to life.

The SR9300 also incorporates Marantz’s proprietary technology, such as the HDAM (Hyper Dynamic Amplifier Module), which enhances the receiver's signal processing capabilities. This results in superior sound quality that minimizes distortion and noise, allowing the listener to appreciate the finer details of their favorite tracks. The unit is also equipped with a high-quality digital processor that supports advanced audio formats and ensures a seamless transition between stereo and surround sound.

In terms of video capabilities, the SR9300 offers multiple HDMI inputs and outputs, allowing for easy integration with various devices, including Blu-ray players and gaming consoles. It supports 1080p video pass-through, ensuring the highest video quality when connected to HD displays. The receiver also features upscaling technology, which enhances lower-resolution video sources to near-HD quality, providing a rich visual experience.

User-friendliness is another hallmark of the Marantz SR9300. The intuitive on-screen setup makes installation straightforward, while the included remote control provides convenient access to all features and settings. Additionally, the unit is compatible with various home automation systems, making it a flexible option for smart home integration.

Overall, the Marantz SR9300 stands out with its combination of powerful performance, versatile connectivity options, and superior sound quality, making it an excellent choice for anyone looking to elevate their home audio-visual experience. Whether you’re enjoying a blockbuster film or listening to your favorite album, the SR9300 delivers an unparalleled auditory experience that is sure to impress.