ENGLISH
INITIAL SET UP
1.Connect the supplied AC power cord.
The STANDBY indicator lights up and the projector goes into the standby mode.
2.Press the POWER ON key on the remote controller or the POWER key on the projector.
The POWER indicator lights up.
3.Press the FOCUS key on the remote controller to display the FOCUS pattern and turn the Focus ring to make an adjustment. Adjust the focus for the sharpest image possible to obtain, using focus pattern.
Press the FOCUS key again to clear off the pattern.
4.Turn the Zoom ring to adjust the size of the image.
5.Switch on the equipment connected to the projector. Press the INPUT SELECT key on the projector or the COMPONENT key,
TO TURN OFF THE POWER
1.Press the STANDBY key on the remote controller or the POWER key on the projector.
2.The fan continues to run for a while to reduce internal heat. The POWER ON indicator flashes in blue and no key will be active minute. After about one minute cooling has been provided, the unit turned off and the STANDBY indicator lights up.
16
