ENGLISH
Lamp Life and Replace Lamp
Lamp Life
Display the remaining lamp life by pressing the INFO key on the remote controller.
VideoMemoryCinemaNoiseReductionAspectTotalLampriggerHoursLifeInputMode COMPONENTStandardAuto6NormalOn1000HourHours1
Notes:
•When the Lamp Life becomes less than 100 hours , it is recommended to replace the lamp unit. A lamp may be worn out when the Lamp Life becomes less than 100 hours .
•The projector is designed not to turn on after the lamp use has exceeded 2000 hours. (Lamp Life 0 HOUR)
If the projector is in use, it will turn off.
3 When the lamp life becomes less than 100 hours and the unit is still on, the remaining lamp life is displayed on the screen automLamptically.
LifeWarning100Hours
3 When the lamp life becomes less than 5 hours, the remaining lamp life is displayed onHoursthe creen .
LampWarningLife5
To clear above, press the MENU key.
3 When the lamp life has expired (Lamp Life 0 HOURS), the unit will be immediatelyWarningtur edHoursff, and the WARNING indicator will light up in red.
LampLife0
Replacing the lamp unit with new one, then use the following procedure to reset (initialize) the lamp life.
Refer to "Replacing Lamp Unit".
1.Unplug the power cord.
2.Wait about one minute and reconnect the power cord.
3.Press the POWER key. The following message appears for 120 seconds.
New Lamp ?
YesNo
4.Select “Yes”, using the 1 / 2 keys.
5.Press the ENTER key. The lamp life indicator is now initialized.
20
