4. Turn the video equipment on and start playback
5. Select the INPUT mode | \P. 29 |
Select the “Video” using the INPUT buttons on the projector or the VIDEO button on the remote
control.
On the On the remote projector control
INPUT
VIDEO
V
INPUT
•When pressing the INPUT buttons on the projector, input mode switches in the following
order: 
Comp. 1
Comp. 2
Video 
RGB
HDMI 
•Pressing the INPUT buttons on the remote control also allows you to switch the input mode.
6. Adjust the focus, image size, and projector angle \PP. 30, 31
1. Adjust the focus by |
| 2. Adjust the projection |
| 3. Adjust the projector |
turning the focus ring. |
| image size by turning |
| angle using the HEIGHT |
|
| |||
|
| the zoom ring. |
| ADJUST lever. |
|
|
|
Focus ring
7. Correct trapezoidal distortion (GEOMETRIC ADJUSTMENT) \PP. 32–35
1.Press cKEYSTONE on the remote control.
2.Press P/R/O/Qon the remote control to set the
3.Press iENTER on the remote control to set the position.
4.Follow steps 2 and 3 to also set the
•When you confirm the lower left position, the screen adjustments will be set and setup will end.
8. Turn the Power off | \P. 29 |
Press the 
/ I STANDBY/ON button on the projector or the STANDBY button on the remote control to put the projector into standby mode.
On the | On the remote | |
| ||
projector | control |
|
| STANDBY |
|
• Unplug the power cord from the AC outlet after the cooling fan stops.
Start Quick
17