Marantz VP4001 Image Projection, BasicOperation, Switching the Input Mode, Turning the Power off (Putting the Projector into Standby Mode)

Turning the Power off (Putting the Projector into Standby Mode)

1 Press / I STANDBY/ON on the projector or aSTANDBY on the remote control to put the projector into standby mode.

STANDBY STANDBY button

STANDBYON

COMP.1 COMP.2 S-VIDEO

C1 C2 S

VIDEO	RGB	HDMI
V	RGB	HDMI
KEYSTONE		MENU

2	Unplug the power cord from the AC
	outlet after the cooling fan stops.
	• The power indicator on the projector
	blinks in green while cooling.
	• The power indicator changes to red when
	the projector finishes cooling.

Info

•Do not unplug the power cord during projection or cooling fan operation. This can cause dam- age due to rise in internal temperature, as the cooling fan also stops.

•When on standby, power to the projector is not OFF completely. If not planning to use the pro- jector for an extended period of time, unplug the AC power cord from AC power outlet as ex- plained above.

Image Projection

Switching the Input Mode

Select the appropriate input mode for the connected equipment.

Press the appropriate INPUT button on the remote control to select the desired input mode.

•When pressing INPUT (P/R) on the projector, in- put mode switches in the following order:

Comp. 1 Comp. 2 S-Video

HDMI RGB Video

On-screen Display

STANDBYON

COMP.1 COMP.2 S-VIDEO

C1 C2 S

VIDEO RGB HDMI

V	RGB	HDMI
KEYSTONE		MENU
RETURN		ENTER
AUTO SYNC		ASPECT

SYNCA

RGB/COMP. IMAGE SHIFT PICTURE MODE

R/CPIC

FREEZEIRIS

IRIS

INPUT buttons

COMP.1	COMP.2 S-VIDEO
C1	C2	S
VIDEO	RGB	HDMI
V	RGB	HDMI

BasicOperation

29