Marquis 2802CID manual T t e r y P r e p a r a t i o n, To Remove the Insulator Strip

INSTALLATION

B a t t e r y P r e p a r a t i o n -

IMPORTANT!!

The 2802CID utilizes a long-life 3V Lithium type back-up battery. This battery retains the memory of the speed dial locations when the 2802CID is unplugged from the telephone line.

The battery compartment is located underneath the desk wedge on the bottom of the base unit. An insulator strip is installed at the factory and must be removed prior to use.

An insulator strip is installed to insure maximum shelf life. This insulator strip must be removed to activate the battery.

The battery will provide 60 days of continuous back-up power with the telephone unplugged. Under normal conditions, the battery will not conduct while the 2802CID is plugged into a telephone line.

TO REMOVE THE INSULATOR STRIP:

The insulator strip is located on the top back edge of the base unit. To remove, simply pull the clear plastic strip. The battery is now activated and providing back-up power.

15