Marquis 2802CID manual Using The Conference Feature

Using The Conference Feature

The “Conference” key is used to establish a 3- way conversation. The conference feature is activated by a “soft” key that will automatically reset when hanging up.

A 3-way “Conference” call can be established while using either the handset or Speakerphone.

To use the “Conference” feature:

1.Place the line that is currently in-use on hold by pressing the “Hold” key. The line status indicator will turn from Green to RED.

2.The second caller can be established by selecting the idle line key to obtain dial tone for out bound dialing.

3.When the second call is established, activate the 3 -way conference call by pressing the “Conference” key.

Line 1 and Line 2 will automatically “bridge” together and all the three

parties can now converse.

4.To end the call, simply hang-up by replacing the handset back to its cradle (on-hook) or by pressing the “Speaker” key. Both callers will drop-off and both

lines will hang-up. The 2802CID is now back to its on-hook, idle state.

5.If you wish to continue speaking with one of the callers and wish to “drop” the other caller, simply press the line key of the caller you wish to continue speaking with. The other caller will automatically drop-off.

30