INSTALLATION
Power Pack “LINE” Connection
The power pack “LINE” connection is used to connect the telephone lines from the wall jack to the telephone.
Using the 3’ modular telephone line cord provided, connect the first end of the cord to the RJ14 telephone jack on the wall or base board. The remaining end of the cord plugs into the “LINE” side of the power pack.
Input Connection
Power Pack “PHONE” Connection
The power pack “PHONE” connection is used to provide both the telephone lines and the power source to the 2802CID telephone.
Using the 15’ modular telephone line cord provided, plug the first end of the line cord into the back of the 2802CID. Plug the remaining end to the power pack jack labeled “PHONE”.
IMPORTANT!
The 2802CID will not function if the line cord connections are not correct. If the LCD display does not activate upon installation, make sure that the telephone line cord connections are not reversed (“LINE”/”PHONE”).
13
