Master Lock B70CEH, B35CEH, B150CEH Portable Forced Air Heaters, Service Procedures, Continued

R

PORTABLE FORCED AIR HEATERS

SERVICE

PROCEDURES

Continued

AIR OUTPUT, AIR INTAKE, AND LINT FILTERS

1.Remove upper shell (see page 8).

2.Remove filter end cover screws using 5/16" nut-driver.

3.Remove filter end cover.

4.Replace air output and lint filters.

5.Wash or replace air intake filter (see Preventative Maintenance Schedule, page 6).

6.Replace filter end cover.

7.Replace fan guard and upper shell.

IMPORTANT: Do not oil filters

PUMP PRESSURE

ADJUSTMENT

1.Remove pressure gauge plug from filter end cover.

2.Install accessory pressure gauge (part number HA1180).

3.Start heater (see Operation, page 5). Allow motor to reach full speed.

4.Adjust pressure. Turn relief valve to right to increase pressure. Turn relief valve to left to decrease pressure. See specifications below for correct pres- sure for each model.

5.Remove pressure gauge. Replace pres- sure gauge plug in filter end cover.

Air Intake Filter

Filter End	Fan Guard
Cover

Lint Filter

Air Output

Filter

Figure 13 - Air Output, Air Intake, and Lint Filters, B35CEH and B70CEH Models

Air Intake Filter

Filter End	Fan Guard
Cover

Lint Filter

Air Output

Filter

Figure 14 - Air Output, Air Intake, and Lint Filters, B100CEH and B150CEH Models

Pressure
Gauge		Pump
Plug
		Pressure
Relief
	Model	(Bar/PSI)
Valve	B35CEH	0.200/2.9
	B70CEH	0.338/4.9
	B100CEH	0.338/4.9
	B150CEH	0.380/5.5
Plastic Cap
Figure 15 - Pressure Gauge Plug Removal	Pressure
(B35CEH and B70CEH Models Shown)	Gauge

Figure 16 - Adjusting Pump Pressure

10 105398