Matsushita CF-30CTQAZBM service manual E F G

Right side

A	B	C D E F G	H
		1394

I

Rear side Bottom

Q

J H K L M N O P R

A:Hard Disk Drive

Reference Manual “Hard Disk Drive”

B:SD Memory Card Slot

Reference Manual “SD Memory Card”

C:SD Memory Card Indicator (Blinking: During access)

Reference Manual “SD Memory Card”

D:IEEE 1394 Interface Connector

Reference Manual “IEEE 1394 Devices”

E:Smart Card Slot

<Only for model with Smart Card slot> Reference Manual “Smart Card”

F:Modem Port

Reference Manual “Modem”

G:LAN Port

Reference Manual “LAN”

H:USB Port

Reference Manual “USB Devices”

I:DC-IN Jack

J:Security Lock

A Kensington cable can be connected.

For further information, read the manual that comes with the cable.

K:Ext Antenna Connector

L:Expansion Bus Connector

Reference Manual “Port Replicator”

M: External Display Port

Reference Manual “External Display”

N:Headphone Jack

You can connect headphones or ampliÞed speakers. When they are connected, audio from the internal speakers is not heard.

O:Microphone Jack

A condenser microphone can be used. If other types of microphones are used, audio input may not be pos- sible, or malfunctions may occur as a result.

When recording in stereo using a stereo micro- phone:

Double-click in the notiÞcation area, click [Op- tions] - [Properties], and add a check mark for [Re-

cording], click [OK] - [Options] - [Advanced Controls] - [Advanced], remove a check mark for [Mono Micro- phone], and then click [Close].

When using a monaural microphone with a 2-termi- nal plug:

With the settings outlined above, only audio on the left track will be recorded.

When monitoring the microphone audio using head- phones, sounds on the left track cannot be heard, regardless of the above settings. This is a result of the computer’s speciÞcations, and is not a malfunc- tion.

P:Serial Port

Q:RAM Module Slot

Reference Manual “RAM Module”

R: Speaker

Reference Manual “Key Combinations”