9.2. Reassembly Instructions
9.2.1. Attention when
•Please execute writing BIOS ID when you exchange the Main Board.
•Parts (Sheet and rubber) etc. related various the Conductive Cloth and Heat Spreader cannot be recycled. Use new parts.
9.2.2. Setting the Antenna PCB L and R
1.Set the Antenna PCB L and R using the 2 Screws. <N2>
2.Fix the
LCD Rear Cabinet Ass’y
Antenna PCB L
Screws <N2>: DRHM5054XA
QArranging the Antenna L and R Cables
Insert the Cable between the pins.
<N2>
<N2> 
<N2>
<N2> | <N2> |
| |
<N2> | Antenna PCB R |
| |
Insert the Cable between the pins.
Safety Working
Attach the Cable Tape
Match to the corner.
Coming off the tape is allowed.
X | Attach it fitting to the corner. |
| Match to the corner. |
| Put it along the inside of boss on X part. |
| X |
| Cable color : black |
| X |
| X |
|
| X |
Cable color : grey |
| |
|
|
|
X
Fit only this part to the groove.
X
X
Safety Working
Attach the Cable Tape
Attach the Rear
Screw Sheet
Match it to the concave side and 
attach it between the bosses.
Safety Working
Attach the Cable Tape
Match it to the protrusion side and attach it between the bosses.
Tighten of Screw | Place the Antenna Main | Place the Antenna Sub | Tighten of Screw |
