Matsushita CF-T4GWCTZ1 2 service manual Removing the HDD, Removing the Top Case, Hdd Ffc

2.2.3.Removing the HDD

Preparation : perform the section 2.2.1. 2.2.2. first.

1.Remove the 2 screws (C) and then remove the HDD cover. Screw (C):DFHE5025XA(N501)

Screw(C)

HDD Cover

Tape

2.Lift up the HDD unit and remove FFC connector and then remove the HDD unit.

3.HDD is taken out of the HDD case.

Note:

Please do not bend pins of the HDD connector, at the time of removing HDD and FFC connector.

HDD Case

HDD

FFC Connector

2.2.4.Removing the Top Case

Preparation : perform the section 2.2.1. , 2.2.2. first.

1.Remove the 7 screws (D) and 5 screws (G). Screw (D):DXHM0039ZA(N5)

Screw (G):DXHM0057ZA(N7)

Screw(G)

Screw(D) Screw(D)

Screw(D)

Screw(D)

Screw(G)
Screw(G)
Screw(G)	Screw(G)

2.Remove the speaker cable from the connector (CN26).

3.Remove the side cover (R) as slide it to this side.

4.Remove the 1 screw (J), 3 screws (K) and 2 screws (L) from top case and then remove the top case.

Screw(J):DXHM0056ZA(N6)

Screw(K):DXQT2+E6FNL(N12)

Screw(L):DXQT26+D8FCL(N15)

Screw(L)

HDD Unit

HDD FFC

	CN26	Screw(L)
	Speaker Cable
Screw(K)

Screw(J)

Screw(K)

Screw(K)

Side Cover(R)

2-3