Matsushita CF-T4GWCTZ1 2 service manual Putting of conductive cloth of LCD cable 75 5mm

Putting of LCD damper(C)

Rib application putting of LCD front case 01mm

LCD Damper(C)

Plinth externals match 01mm

Rib edge match of LCD front case 01mm

Rib application putting of LCD front case 01mm

Drawing out specification of LCD cable

LCD Cable (Touch Panel)

LCD Cable (Inverter)

The cable is processed under the shaft .

Note:It is confirmed that the cable does not narrow between cabinets.

LCD cable processing

68mm

Putting of conductive cloth of LCD cable

75 5mm	Conductive cloth is wrapped
	(Leave the half)

LCD Cable

Conductive Cloth

About 8mm at the edge of conductive cloth is putting on the rib of the bottom case for conduct

The cable is processed under the convex part

The cable is processed to the ditch

3-3